Use this kit to repair small cuts, punctures or holes in your DCF gear on the fly by sticking a patch over the affected area. Repair patches come ready to use; just peel the back and apply.

Contents:
1 tape strip: 1 cm x 15 cm (1/2″ x 6″)
1 tape strip: 2 cm x 15 cm (1″ x 6″)
1 large rectangular patch: 4 cm x 7.5 cm (1 1/2″ x 3″)
3 square patches: 2.5 cm (1″ square)

For best results, make sure the material is dry and clean. The glue is pressure activated, so press down hard for a few seconds. The tape strips and large patches can be cut to size,  just use sharp scissors or an Exacto knife. DCF is difficult to cut, so make sure you use a sharp tool.

Integrity: If the patch sufficiently overlaps ‘healthy’ material on all sides, the functional integrity of your repaired item will not be weakened.

Note: If you get a large cut or hole that cannot be easily patched over, please contact us, and we will be happy to make repair arrangements on a case-by-case basis.