Description

Repair a small cut, puncture or hole in your DCF gear on the fly by gluing a patch over the affected area. Repair patches come ready to use; just peel the back and apply.

Contents: Two tape strips: 1/2″ x 6″  |  Two tape strips: 3/4″ x 6″  |  Two large rectangular patches: 1.5″ x 3″  |  Eight small round patches: 1″ diameter

For best results, make sure the material is dry and clean. The glue is pressure activated, so press down for a few seconds. Tape strips and large patches can be cut to size. Use sharp scissors or exacto knife, as DCF is tough to cut.

Integrity: If the patch sufficiently overlaps ‘healthy’ material on all sides, the functional integrity of your repaired item will not be weakened. Both DCF_0.5oz and DCF_1.0oz patches can be applied to either DCF_0.5oz or DCF_1.0oz materials.

Note: If you get a large cut or hole that cannot be easily patched over, please contact us, and we will be happy to make repair arrangements on a case-by-case basis.